|
 |
|
 |
| |

Maxi Range | GFS Series: Three-Phase Soundproof Diesel Generator |
TECHNICAL DATA (50Hz) |
GENSET MODEL |
GFS-8 |
GFS-10 |
GFS-12 |
GFS-15 |
GFS-20 |
DIESEL ENGINE MODEL |
YSAD380 |
YD480 |
YD485 |
YSD490Q |
Y4100 |
Engine Characters |
Water-cooled, in line, 4-cycle, direct injection, 1500rpm |
Bore/Stroke (mm) |
80/85 |
80/90 |
85/90 |
90/100 |
100/115 |
Rated output (KW) |
10 |
13.2 |
15 |
21 |
27 |
Fuel Consumption (g/kw.hr) |
<247 |
<250.2 |
<248.9 |
<247.5 |
<237 |
Lube Consumption (g/kw.hr) |
|
|
<2.72 |
|
|
Compression ratio |
18 |
|
|
|
|
Starting |
Electric (12V) |
|
|
|
|
ALTERNATOR MODEL |
SLG164B |
SLG164C |
SLG164D |
SLG184E |
SLG184F |
Rated power (KW) |
8 |
10.8 |
12.8 |
15 |
22 |
Voltage (V) |
230/400 |
230/400 |
230/400 |
230/400 |
230/400 |
Current(A) |
14.4 |
18 |
21.6 |
27 |
36 |
Frequency (Hz) |
50 |
|
|
|
|
Power factor (cos) |
0.8 |
|
|
|
|
Dimensions (LxWxH) mm |
1660x800x950 |
1660x800x950 |
1830x880x950 |
1830x880x950 |
2000x900x1040 |
Net Weight (kg) |
650 |
700 |
750 |
800 |
900 |
|
|
 |
 |
 |
|
 |
|
 |
| |

Maxi Range | SFS Series: Single-Phase Soundproof Diesel Generator |
|
|
|
|
|
|
|
DIESEL ENGINE MODEL |
YSAD380 |
YD480 |
YD485 |
YSD490Q |
Y4100 |
Engine Characters |
Water-cooled, in line, 4-cycle, direct injection, 1500rpm |
Bore/Stroke (mm) |
80/85 |
80/90 |
85/90 |
90/100 |
100/115 |
Rated output (KW) |
10 |
13.2 |
15 |
21 |
27 |
Fuel Consumption (g/kw.hr) |
<247 |
<250.2 |
<248.9 |
<247.5 |
<237 |
Lube Consumption (g/kw.hr) |
<2.72 |
|
|
|
|
Compression ratio |
18 |
|
|
|
|
Starting |
Electric (12V) |
|
|
|
|
ALTERNATOR MODEL |
SLG164B |
SLG164C |
SLG164D |
SLG184E |
SLG184F |
Rated power (KW) |
8.4 |
11 |
13 |
16.6 |
20 |
Voltage (V) |
115/230 |
115/230 |
115/230 |
115/230 |
115/230 |
Current(A) |
69.5/34.8 |
87/43.5 |
104.4/52.2 |
130.4/65.2 |
174/87 |
Frequency (Hz) |
50 |
|
|
|
|
Power factor (cos) |
1 |
|
|
|
|
Dimensions (LxWxH) mm |
1660x800x950 |
1660x800x950 |
1830x880x950 |
1830x880x950 |
2000x900x1040 |
Net Weight (kg) |
650 |
700 |
750 |
800 |
900 |
|
|
 |
 |
 |
|
 |
|
 |
| |

SFS Series: Single-Phase Soundproof Diesel Generator |
Rating Definitions |
Continuous Power Model D with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model D with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
Maxi Range | SFS Series: Single-Phase Soundproof Diesel Generator |
AIR-COOLED GENERATOR SETS |
WATER COOLED GENERATOR SETS |
GENSET |
Continuous model |
D20 |
D30 |
D40 |
D48 |
D24W |
D40W |
D48W |
D75W |
D100W |
D120W |
MODEL |
Standby model |
D22S |
D33S |
D44S |
D53S |
D24WS |
D40WS |
D48WS |
D75WS |
D100WS |
D120WS |
Continuous output (KW/KVA) |
20/25 |
30/38 |
40/50 |
48/60 |
25/31.3 |
40/50 |
48/60 |
75/94 |
100/120 |
120/150 |
Standby output (KW/KVA) |
22/28 |
33/41 |
44/55 |
52.8/66 |
27.5/34.3 |
44/55 |
52.8/66 |
82/102.5 |
110/132 |
132/165 |
TECHNICAL DATA |
DIESEL ENGINE MODEL |
F3L912 |
F4L912 |
F6L912 |
F6L913 |
D226B-3D |
TD226B-3D |
TD226B-4D |
TD226B-6D |
TBD226B-6D |
TBD226B-6D/13023811 |
Engine Characters |
Vertical type, 4-stroke, air-cooled, |
Water-cooled, in-line, 4-stroke, humid cylinder liner, direct injection |
direct injection, 1500 rpm |
Constant output (KW) |
24 |
32 |
48 |
51 |
30 |
45 |
60 |
90 |
120 |
132 |
Standby output (KW) |
26 |
35 |
52 |
54 |
33 |
49.5 |
66 |
99 |
132 |
145.2 |
Aspiration |
Naturally |
Naturally |
Turbo charged |
Turbo charged |
Bore (mm)x Stroke (mm) |
100X120 |
105X120 |
Cubic Capacity (Liters) |
2.8 |
3.8 |
5.7 |
6.1 |
3.12 |
4.16 |
6.23 |
Compression Ratio |
17:1 |
18:1 |
Speed characteristics |
The speed stability bandwidth <+0.25%, the steady governing rate <1% |
Fuel Consumption (g/KW.h) |
<215 |
<218 |
<221 |
<234 |
<208 |
<205 |
Lube Consumption (prime) |
<1.36g/kW.h |
<1.45g/kW.h |
ALTERNATOR MODEL |
SLG184F |
SLG184H |
SLG224D |
SLG224E |
SLG184G |
SLG224D |
SLG224E |
SLG274C |
SLG274E |
SLG274F |
Continuous Output (KW/KVA) |
22/28 |
30/38 |
40/50 |
48/60 |
25/31.3 |
40/50 |
48/60 |
80/100 |
112/140 |
128/160 |
Power Efficiency |
90% |
90% |
90% |
90% |
91% |
90.6% |
91.2 % |
90.1 % |
90% |
90% |
Voltage Regulation |
+/- 1.0 % with 4 % engine governing |
Waveform Distortion |
No load <1.5 % and non-disttorting balanced linear load <5 % |
THF/TIF |
<2% / <50 |
OPEN TYPE |
DIMENSIONS AND WEIGHTS |
Genet Cont. MODEL |
D20 |
D30 |
D40 |
D48 |
D24W |
D40W |
D48W |
D75W |
D100W |
D120W |
Length: mm |
1650 |
1880 |
2000 |
2085 |
168 |
168 |
220 |
245 |
250 |
260 |
Width: mm |
820 |
820 |
820 |
1260 |
70 |
70 |
70 |
90 |
90 |
90 |
Height: mm |
1200 |
1240 |
1240 |
1200 |
150 |
150 |
150 |
170 |
185 |
185 |
Net Weight: kg |
950 |
975 |
995 |
1550 |
650 |
660 |
800 |
1300 |
1450 |
1600 |
|
|
 |
 |
 |
|
 |
|
 |
| |

DEUTZ RANGE OF SOUND-PROOF GENERATOR SETS D20/S-D48/S & D48W/S-D120W/S |
Rating Definitions |
Continuous Power Model D with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model D with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
Maxi Range | DEUTZ RANGE OF SOUND-PROOF GENERATOR SETS D20/S-D48/S & D48W/S-D120W/S |
SOUNDPROOF GENSET CHARACTERISTICS |
HIGHLY CORROSION RESISTANT CONSTRUCTION |
| * Body made from special treated steel sheet. |
| * Stainless steel or cast aluminium locks and hinges. |
| * Zing plated or stainless steel fasteners. |
| * 2.5mm thick Sheet treated by grit blast Sa 2 |
| * Two pack of epoxy paint system. |
|
|
|
|
|
|
|
|
|
|
| * Full length extra wide doors on each side. |
* Control panel viewing window to easily view status of generating set. |
| * Doors top hung and supported by gas struts. |
* Emergency stop button mounted externally. |
|
| * Top hinged doors provide a shelter when open. |
* Cooling fan and battery charging alternator fully guarded. |
|
* Exhaust silencing system totally enclosed for operator safety. |
DIMENSIONS AND WEIGHTS |
| Sound-proof Genset |
Rating Power 400V/50HZ |
Width: mm |
Height: mm |
Net Weight: kg |
| Cont. Model |
kW |
kVA |
| D20/S |
20 |
25 |
870 |
1400 |
1050 |
| D30/S |
30 |
38 |
870 |
1440 |
1075 |
| D40/S |
40 |
50 |
870 |
1400 |
1050 |
| D48/S |
48 |
60 |
1310 |
1400 |
1650 |
| D24W/S |
24 |
30 |
700 |
1500 |
950 |
| D40W/S |
40 |
50 |
700 |
1500 |
1050 |
| D48W/S |
48 |
60 |
700 |
1500 |
1150 |
| D75W/S |
75 |
94 |
900 |
1700 |
1300 |
| D100W/S |
100 |
120 |
900 |
1850 |
1450 |
| D120W/S |
120 |
150 |
900 |
1850 |
1600 |
|
|
 |
 |
 |
|
 |
|
 |
| |

PERKINS RANGE OF STANDARD GENERATOR SETS P30 - P56 |
Rating Definitions |
Continuous Power Model P with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model P with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
Maxi Range | PERKINS RANGE OF STANDARD GENERATOR SETS P30 - P56 |
MAIN SPECIFICATIONS OF GENERATOR SETS |
GENSET |
Continuous model |
P30 |
P34 |
P36 |
P40 |
P48 |
P56 |
MODEL |
Standby model |
P33S |
P37S |
P40S |
P44S |
P52S |
P61S |
| Continuous output (KW/KVA) |
30/38 |
34/42 |
36/45 |
40/50 |
48/60 |
56/70 |
| Standby output (KW/KVA) |
33/41 |
37/46 |
40/50 |
44/55 |
52/65 |
61/76 |
|
|
|
|
|
|
|
|
TECHNICAL DATA |
DIESEL ENGINE MODEL |
1004G |
1004G |
1004G |
1004TG |
1004TG |
1004TG |
Engine Characters |
Water-cooled, in line, 4-cylinders, 4-stroke, direct injection, Dry cylinder liner, 1500rpm |
Constant Output (KW) |
40 |
65.7 |
Standby Output (KW) |
44 |
72.3 |
Aspiration |
Natural |
Turbochargered |
Bore (mm) x Stroke (mm) |
100 x 127 |
Cubic Capacity (Liters) |
3.99 |
3.99 |
Piston Speed (m/s) |
6.35 |
6.35 |
Compression Ration |
16.0:1 |
16.0:1 |
Stability bandwidth |
<+-0.8% |
<+-0.8% |
Steady governing rate |
<5% |
<5% |
Acoustic Pressure |
<91.2dBA (At full load, 1m distance) |
<91.2dBA (At full load, 1m distance |
Exhaust Temperature:°C |
600 |
561 |
Exhaust Back PRESSURE |
5KPa |
6KPa |
Air induction System |
Dry element type with back pressure warning indication |
Lube Temperature / Capacity |
125°C/8.1L(Max.) |
BMEP: kPA (Prime power) |
882 |
1369 |
Heat Rejection to Exhaust |
35.7 kW/min |
53.4kW/min |
Heat Rejection to Cooling |
38 kW/min |
43 kW/min |
Cooling System Volume |
21L |
22.2L |
Cooling Air Flow |
55 m3/min |
100 m3/min |
Combustion Air Flow |
2.64 m3/min |
4.52 m3/min |
Exhaust Gas Flow |
7.54 m3/min |
13.1 m3/min |
Min. Fuel Consumption |
<210 g/kW.h |
<205 g/kW.h |
| ALTERNATOR MODEL |
SLG184H |
SLG224C |
SLG224D |
SLG224D |
SLG224E |
SLG224F |
| Continuous Output (KW/KVA) |
30/37.5 |
34/42.5 |
40/50 |
40/50 |
48/60 |
58/72.5 |
| Power Efficiency |
86.3% |
87% |
88.2% |
88.2% |
88.6% |
90% |
| Voltage Regulation |
+/- 1.0% with 4% engine governing |
| Waveform Distortion |
No load < 1.5 % and non-disstorting balanced linear load <5% |
| THF / TIF |
<2%/<50 |
|
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
| Genet Cont. MODEL |
P30 |
P34 |
P36 |
P40 |
P48 |
P56 |
| Length: mm |
2100 |
2100 |
2130 |
2130 |
2130 |
2130 |
| Width: mm |
710 |
710 |
710 |
710 |
710 |
710 |
| Height: mm |
1260 |
1260 |
1260 |
1340 |
1340 |
1340 |
| Net Weight: kg |
1040 |
1050 |
1080 |
1080 |
1100 |
1400 |
|
|
 |
 |
 |
|
 |
|
 |
| |

PERKINS RANGE OF STANDARD GENERATOR SETS P68 - P108 |
Rating Definitions |
Continuous Power Model P with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model P with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
PERKINS RANGE OF STANDARD GENERATOR SETS P68 - P108 |
MAIN SPECIFICATIONS OF GENERATOR SETS |
| GENSET |
Continuous model |
P68 |
P72 |
P80 |
P91 |
P108 |
| MODEL |
Standby model |
P75S |
P80S |
P88S |
P100S |
P120S |
| Continuous output (KW/KVA) |
68/85 |
72/90 |
80/100 |
91/114 |
108/135 |
| Standby output (KW/KVA) |
75/94 |
80/100 |
88/110 |
100/125 |
120/150 |
|
|
|
|
|
|
|
TECHNICAL DATA |
| DIESEL ENGINE MODEL |
1006TG1A |
1006TG1A |
1006TG2A |
1006TAG |
1006TAG |
| Engine Characters |
Water-cooled, in line, 4-cylinders, 4-stroke, direct injection, Dry cylinder liner, 1500rpm |
| Constant Output (KW) |
84.3 |
92.3 |
121 |
| Standby Output (KW) |
92.7 |
102 |
134 |
| Aspiration |
Turbocharged |
Turbocharged |
Turbochargered and aftercooled |
| Bore (mm) x Stroke (mm) |
100x127 |
100x127 |
100x127 |
| Cubic Capacity (Liters) |
5.99 |
5.99 |
5.99 |
| Piston Speed (m/s) |
6.35 |
6.35 |
6.35 |
| Compression Ration |
16:1 |
16:1 |
17:1 |
| Stability bandwidth |
<+-0.8% |
<+-0.8% |
<+-0.25% |
| Steady governing rate |
<5% |
<5% |
<1% |
| Acoustic Pressure |
<92.1dBA (At full load, 1m distance) |
<94.3dBA |
<94.9dBA |
| Exhaust Temperature:°C |
545 |
550 |
571 |
| Exhaust Back PRESSURE |
6KPa |
6KPa |
6KPa |
| Air induction System |
Dry element type with back pressure warning indication |
| Lube Temperature / Capacity |
125°C/16.1L(Max.) |
125°C/19L(Max.) |
| BMEP: kPA (Prime power) |
1283 |
1404 |
1964 |
| Heat Rejection to Exhaust |
59.1 kW/min |
66.5 kW/min |
115 kW/min |
| Heat Rejection to Cooling |
56 kW/min |
63kW/min |
65.5 kW/min |
| Cooling System Volume |
27.7L |
27.7L |
37.2L |
| Cooling Air Flow |
135 m3/min |
135 m3/min |
154 m3/min |
| Combustion Air Flow |
5.74 m3/min |
5.74 m3/min |
8.38 m3/min |
| Exhaust Gas Flow |
15.56 m3/min |
16.24 m3/min |
24.14 m3/min |
| Min. Fuel Consumption |
<205g/kW.h |
| ALTERNATOR MODEL |
SLG224G |
SLG274C |
SLG274C |
SLG274D |
SLG274E |
| Continuous Output (KW/KVA) |
68/85 |
80/100 |
80/100 |
91/114 |
112/140 |
| Power Efficiency |
90.2% |
90.4% |
90.4% |
90.8% |
91.7% |
| Voltage Regulation |
+/- 1.0% with 4% engine governing |
| Waveform Distortion |
No load < 1.5 % and non-disstorting balanced linear load <5% |
| THF / TIF |
<2%/<50 |
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
| Genet Cont. MODEL |
P68 |
P72 |
P80 |
P91 |
P108 |
| Length: mm |
2480 |
2480 |
2480 |
2580 |
2580 |
| Width: mm |
710 |
710 |
710 |
800 |
800 |
| Height: mm |
1480 |
1480 |
1480 |
1480 |
1480 |
| Net Weight: kg |
1440 |
1490 |
1500 |
1520 |
1600 |
|
|
 |
 |
 |
|
 |
|
 |
| |

PERKINS RANGE OF SOUND-PROOF GENERATOR SETS P30/S-P108/S |
SOUNDPROOF GENSET CHARACTERISTICS |
HIGHLY CORROSION RESISTANT CONSTRUCTION |
| * Body made from special treated steel sheet. |
| * Stainless steel or cast aluminium locks and hinges. |
| * Zing plated or stainless steel fasteners. |
| * 2.5mm thick Sheet treated by grit blast Sa 2½ |
| * Two pack of epoxy paint system. |
|
|
|
|
|
|
|
|
|
|
|
|
| EXCELLENT ACCESS FOR MAINTENANCE |
SECURITY AND SAFETY |
| * Full length extra wide doors on each side. |
* Control panel viewing window to easily view status of generating set. |
| * Doors top hung and supported by gas struts. |
* Emergency stop button mounted externally. |
| * Top hinged doors provide a shelter when open. |
* Cooling fan and battery charging alternator fully guarded. |
| * Lube oil and cooling water drains piped to exterior of the canopy. |
* Exhaust silencing system totally enclosed for operator safety. |
|
|
|
|
|
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
| Sound-proof Genset |
Rating Power 400V/50HZ |
Length: mm |
Width: mm |
Height: mm |
Net Weight: kg |
| Cont. Model |
kW |
kVA |
P30/S |
30 |
38 |
2150 |
880 |
1230 |
1250 |
P34/S |
34 |
42 |
2150 |
880 |
1230 |
1260 |
P36/S |
36 |
45 |
2150 |
880 |
1230 |
1300 |
P40/S |
40 |
50 |
2250 |
1060 |
1230 |
1400 |
P48/S |
48 |
60 |
2250 |
1060 |
1230 |
1460 |
P56/S |
56 |
70 |
2550 |
1060 |
1230 |
1760 |
P68/S |
68 |
85 |
2550 |
1060 |
1260 |
2120 |
P72/S |
72 |
90 |
2550 |
1060 |
1260 |
2140 |
P80/S |
80 |
100 |
2550 |
1060 |
1260 |
2150 |
P91/S |
91 |
114 |
2650 |
1060 |
1260 |
2170 |
P108/S |
108 |
135 |
2650 |
1060 |
1260 |
2200 |
|
|
 |
 |
 |
|
 |
|
 |
| |

CUMMINS RANGE OF STANDARD GENERATOR SETS C20-C104 |
Rating Definitions |
Continuous Power Model C with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model C with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
CUMMINS RANGE OF STANDARD GENERATOR SETS C20-C104 |
MAIN SPECIFICATIONS OF GENERATOR SETS |
| GENSET |
Continuous model |
C20 |
C30 |
C45 |
C68 |
C77 |
C91 |
C104 |
| MODEL |
Standby model |
C22S |
C33S |
C50S |
C75S |
C85S |
C100S |
C114S |
| Continuous output (KW/KVA) |
20/25 |
30/37.5 |
45/56 |
68/85 |
77/96 |
91/114 |
104/130 |
| Standby output (KW/KVA) |
22/27.5 |
33/41.25 |
50/63 |
75/94 |
85/106 |
100/125 |
114/143 |
|
|
|
|
|
|
|
|
|
TECHNICAL DATA |
| DIESEL ENGINE MODEL |
4B3.9-G2 |
4BT3.9-G2 |
4BTA3.9-G2 |
6BT5.9-G2 |
6BT5.9-G2 |
6BTA5.9-G2 |
6BTAA5.9-G2 |
| Engine Characters |
Water-cooled, in line, 4-stroke, direct injection, Wet cylinder liner, 1500rpm |
| Constant Output (KW) |
24 |
36 |
50 |
92 |
92 |
110 |
120 |
| Standby Output (KW) |
27 |
40 |
55 |
100 |
100 |
120 |
132 |
| Aspiration |
Naturally |
Turbo |
Turbo & Aftercooled |
Turbo |
Turbo & Aftercooled |
| Bore (mm) x Stroke (mm) |
102 x 120 |
| Cubic Capacity (Liters) |
3.91 |
5.9 |
| Piston Speed (m/s) |
|
| Compression Ratio |
16.5:1 |
17.5:1 |
| Cooling System Volume (L) |
8 |
11 |
31 |
17 |
| Max. Water Temperature |
100°C |
| Speed characteristics |
The speed stability bandwidth <+0.25%. The steady governing rate <1% |
| Fuel Consumption |
<215g/kW.h |
<220g/kW.h |
| Lube Consumption (prime) |
<1.36g/kW.h |
| Radiated Heat to Ambient (KWm) |
6 |
6 |
8 |
14 |
N/A |
N/A |
| Heat Rejection to coolant (KWm) |
27 |
27 |
29 |
62 |
N/A |
N/A |
| Heat Rejection to Exhaust (KWm) |
38 |
38 |
41 |
69 |
N/A |
N/A |
| Fan Cooling Air Flow (m3/h) |
6790 |
7470 |
| Intake Air Flow (l/s) |
52 |
52 |
52 |
94 |
N/A |
N/A |
| Exhaust Gas Flow (m3/h) |
572 |
601 |
612 |
840 |
1020 |
1302 |
1352 |
| Exhaust Temperature (°C) |
480 |
492 |
502 |
510 |
576 |
524 |
541 |
| Exhaust Back Pressure |
10kPa(Maximum) |
| ALTERNATOR MODEL |
SLG184F |
SLG184H |
SLG224E |
SLG224G |
SLG274C |
SLG274D |
SLG274E |
| Continuous Output (KW/KVA) |
22/275 |
30/37.5 |
48/60 |
68/85 |
80/100 |
91/114 |
112/140 |
| Power Efficiency |
81% |
90% |
88.6% |
90.2 % |
90.4 % |
90.8 % |
91.7 % |
| Voltage Regulation |
+- 1.0 % with 4 % engine governing |
| Waveform Distortion |
No load < 1.5% and non-disttorting balanced linear load < 5 % |
| THF/TIF |
<2% / <50 |
| Fan Cooling Air Flow (l/s) |
216 |
514 |
|
|
|
|
|
|
|
|
|
| DIMENSIONS AND WEIGHTS |
| Genet Cont. MODEL |
C20 |
C30 |
C45 |
C68 |
C77 |
C91 |
C104 |
| Length: mm |
1610 |
1610 |
1630 |
2070 |
2190 |
2330 |
2330 |
| Width: mm |
650 |
650 |
650 |
750 |
750 |
750 |
750 |
| Height: mm |
1340 |
1340 |
1460 |
1460 |
1460 |
1460 |
1460 |
| Net Weight: kg |
950 |
1050 |
1110 |
1370 |
1400 |
1500 |
1500 |
|
|
 |
 |
 |
|
 |
|
 |
| |

CUMMINS RANGE OF STANDARD GENERATOR SETS C20-C104 |
Rating Definitions |
Continuous Power Model C with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model C with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
CUMMINS RANGE OF STANDARD GENERATOR SETS C20-C104 |
MAIN SPECIFICATIONS OF GENERATOR SETS |
| GENSET |
Continuous model |
C140 |
C160 |
C200 |
C250 |
C280 |
| MODEL |
Standby Model |
C160S |
C176S |
C220S |
C275S |
C310S |
| Continuous output (KW/KVA) |
140/175 |
160/200 |
200/250 |
250/313 |
280/350 |
| Standby output (KW/KVA) |
160/200 |
176/220 |
220/275 |
275/344 |
310/388 |
|
|
|
|
|
|
|
TECHNICAL DATA |
| DIESEL ENGINE MODEL |
6CTA8.3-G2 |
6CTAA8.3-G2 |
NTA855-G1 |
NTA855-G2 |
NTA855-G4 |
| Engine Characters |
Water-cooled, in line, 4-stroke, direct injection, Wet cylinder liner, 1500rpm |
| Constant Output (KW) |
163 |
183 |
240 |
283 |
317 |
| Standby Output (KW) |
180 |
205 |
265 |
321 |
351 |
| Aspiration |
Turbocharged and Aftercooler |
| Bore (mm) x Stroke (mm) |
114x135 |
140x152 |
| Cubic Capacity (Liters) |
8.3 |
14 |
| Piston Speed (m/s) |
6.75 |
7.6 |
| Compression Ratio |
17.01:1 |
15:1 |
| Cooling System Volume (L) |
12.3 |
51 |
| Max. Water Temperature |
100°C |
| Speed characteristics |
The speed stability bandwidth < +- 0.25%. The steady governing rate <1% |
| Fuel Consumption |
210g/kW.h |
| Lube Consumption (prime) |
<1.36g/kW.h |
| Radiated Heat to Ambient (KWm) |
24 |
42 |
46 |
| Heat Rejection to coolant (KWm) |
88 |
167 |
187 |
| Heat Rejection to Exhaust (KWm) |
127 |
208 |
212 |
| Fan Cooling Air Flow (m3/h) |
19980 |
29380 |
29448 |
| Intake Air Flow (l/s) |
163 |
375 |
408 |
| Exhaust Gas Flow (m3/h) |
1850 |
3550 |
4060 |
| Exhaust Temperature (°C) |
638 |
4850C |
5410C |
| Exhaust Back Pressure |
10kPa(Maximum) |
ALTERNATOR MODEL |
SLG274G |
SLG274H |
SLG314C |
SLG314E |
SLG314F |
| Continuous Output (KW/KVA) |
140/175 |
160/200 |
200/250 |
260/325 |
304/380 |
| Power Efficiency |
92.5% |
93.3% |
92% |
93% |
92.6% |
| Voltage Regulation |
+- 1.0% with 4% engine governing |
| Waveform Distortion |
No load < 1.5% and non-disttorting balanced linear load <5% |
| THF/TIF |
<2% / <50 |
| Fan Cooling Air Flow (l/s) |
514 |
486 |
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
Genet Cont. MODEL |
C140 |
C160 |
C200 |
C250 |
C280 |
Length: mm |
2500 |
3090 |
3550 |
3550 |
3620 |
Width: mm |
820 |
1120 |
1120 |
1120 |
1120 |
Height: mm |
1650 |
1600 |
1600 |
1600 |
1600 |
Net Weight: kg |
2000 |
2800 |
3200 |
3400 |
3550 |
|
|
 |
 |
 |
|
 |
|
 |
| |

CUMMINS RANGE OF STANDARD GENERATOR SETS C300-C800 |
Rating Definitions |
Continuous Power Model C with no Suffix |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in lieu of commercially purchased power. There is no limitation to the annual hours of |
operation and this model can supply 10% overload power for 1 hour in 12 hours. |
Standby Power Model C with Suffix (S) |
These ratings are applicable for supplying continuous electrical power (at variable load) |
in the event of a utility power failure. No overload is permitted on these ratings. The |
alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27°C |
CUMMINS RANGE OF STANDARD GENERATOR SETS C300-C800 |
MAIN SPECIFICATIONS OF GENERATOR SETS |
GENSET |
Continuous model |
C300 |
C360 |
C400 |
C500 |
C600 |
C800 |
| MODEL |
Standby model |
C330S |
C400S |
C440S |
C565S |
C670S |
C900S |
| Continuous output (KW/KVA) |
300/375 |
360/450 |
400/500 |
512/640 |
600/750 |
800/1000 |
| Standby output (KW/KVA) |
330/413 |
400/500 |
440/550 |
565/706 |
670/838 |
900/1125 |
|
|
|
|
|
|
|
|
| TECHNICAL DATA |
| DIESEL ENGINE MODEL |
KTA19-G2 |
KTA19-G3 |
KTA19-G4 |
KTA38-G |
KTA38-G2 |
KTA38-G5 |
| Engine Characters |
Water-cooled, in line, 4-stroke, direct injection, Wet cylinder liner, 1500rpm |
| Constant Output (KW) |
336 |
403 |
448 |
560 |
664 |
880 |
| Standby Output (KW) |
369 |
448 |
503 |
616 |
731 |
970 |
| Aspiration |
Turbocharged and Aftercooled |
| Bore (mm) x Stroke (mm) |
159x159 |
| Cubic Capacity (Liters) |
19 |
38 |
| Piston Speed (m/s) |
7.9 |
| Compression Ratio |
14.5:1 |
13.9:1 |
| Cooling System Volume (L) |
91 |
196 |
202 |
| Max. Water Temperature |
100°C |
| Speed characteristics |
The speed stability bandwidth <+0.25%. The steady governing rate <1% |
| Fuel Consumption |
<215g/kW.h |
| Lube Consumption (prime) |
<1.36g/kW.h |
| Radiated Heat to Ambient (KWm) |
50 |
58 |
64 |
96 |
101 |
125 |
| Heat Rejection to coolant (KWm) |
206 |
247 |
240 |
389 |
407 |
539 |
| Heat Rejection to Exhaust (KWm) |
239 |
263 |
319 |
540 |
511 |
544 |
| Fan Cooling Air Flow (m3/h) |
29448 |
35280 |
103957 |
109530 |
| Intake Air Flow (l/s) |
432 |
486 |
532 |
802 |
850 |
1140 |
| Exhaust Gas Flow (m3/h) |
4298 |
4842 |
5162 |
8071 |
8632 |
10983 |
| Exhaust Temperature (°C) |
524 |
528 |
538 |
541 |
499 |
| Exhaust Back Pressure |
10kPA(Maximum) |
6.7kPA(Max) |
ALTERNATOR MODEL |
SLG314F |
SLG354C |
SLG354D |
SLG404D |
SLG404E |
SLG404G |
| Continuous Output (KW/KVA) |
304/380 |
360/450 |
400/500 |
500/625 |
600/750 |
800/1000 |
| Power Efficiency |
92.6% |
93.8% |
94.10% |
94.9% |
93.70% |
94.7% |
| Voltage Regulation |
+-1.0% with 4% engine governing |
+-0.5% with 4% engine governing |
| Waveform Distortion |
No load < 1.5% and non-distorting balanced linear load <5% |
| THF/TIF |
<2% / <50 |
| Fan Cooling Air Flow (l/s) |
486 |
1035 |
1614 |
|
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
| Genet Cont. MODEL |
C300 |
C360 |
C400 |
C500 |
C600 |
C800 |
| Length: mm |
3750 |
3670 |
3670 |
3800 |
4300 |
4670 |
| Width: mm |
1220 |
1220 |
1220 |
1520 |
1600 |
1750 |
| Height: mm |
1900 |
1900 |
1900 |
2250 |
2250 |
2250 |
| Net Weight: kg |
4200 |
4350 |
4800 |
8600 |
8950 |
9250 |
|
|
 |
 |
 |
|
 |
|
 |
| |

CUMMINS RANGE OF SOUND-PROOF GENERATOR SETS C20/S-C500/S |
SOUNDPROOF GENSET CHARACTERISTICS |
| HIGHLY CORROSION RESISTANT CONSTRUCTION |
| * Body made from special treated steel sheet. |
|
|
|
|
|
|
|
|
| * Stainless steel or cast aluminium locks and hinges. |
|
|
|
|
|
|
|
| * Zing plated or stainless steel fasteners. |
|
|
|
|
|
|
|
|
| * 2.5mm thick Sheet treated by grit blast Sa 2½ |
|
|
|
|
|
|
|
|
| * Two pack of epoxy paint system. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EXCELLENT ACCESS FOR MAINTENANCE |
SECURITY AND SAFETY |
| * Full length extra wide doors on each side. |
* Control panel viewing window to easily view status of generating set. |
| * Doors top hung and supported by gas struts. |
* Emergency stop button mounted externally. |
| * Top hinged doors provide a shelter when open. |
* Cooling fan and battery charging alternator fully guarded. |
| * Lube oil and cooling water drains piped to exterior of the canopy. |
* Exhaust silencing system totally enclosed for operator safety. |
|
|
|
|
|
|
|
|
|
|
|
|
DIMENSIONS AND WEIGHTS |
| Sound-proof Genset |
Rating Power 400V/50HZ |
Length: mm |
Width: mm |
Height: mm |
Net Weight: kg |
| Cont. Model |
kW |
kVA |
| C20/S |
20 |
25 |
1900 |
1000 |
1460 |
980 |
| C30/S |
30 |
37.5 |
2100 |
1000 |
1460 |
1175 |
| C45/S |
45 |
56 |
2770 |
1100 |
1460 |
1340 |
| C68/S |
68 |
85 |
3000 |
1100 |
1850 |
1650 |
| C77/S |
77 |
96 |
3000 |
1100 |
1850 |
1650 |
| C91/S |
91 |
104 |
3000 |
1100 |
1850 |
1650 |
| C105/S |
105 |
131 |
3300 |
1150 |
2160 |
1750 |
| C140/S |
140 |
175 |
3300 |
1150 |
2160 |
2000 |
| C160/S |
160 |
200 |
4000 |
1530 |
1850 |
2950 |
| C200/S |
200 |
250 |
4050 |
1530 |
2450 |
3600 |
| C250/S |
250 |
313 |
4050 |
1530 |
2450 |
3800 |
| C280/S |
280 |
350 |
4050 |
1850 |
2450 |
3950 |
| C300/S |
300 |
375 |
4250 |
1850 |
2550 |
4600 |
| C360/S |
360 |
450 |
4250 |
1850 |
2550 |
4850 |
| C400/S |
400 |
600 |
4300 |
2000 |
2650 |
5300 |
| C500/S |
500 |
625 |
4300 |
2200 |
2850 |
5600 |
|
|
 |
 |
 |
|
|
|
|
|
|